Handler IV
Handler IV
This one purchase for my lawn care business has saved me more time than any other thing I have ever bought! I (Pete) do all the bulk mixing myself, so, you can imagine this takes up quite a bit of time. I mix 5000 gallons of finished solution each time I mix. This solution goes into two 2,500-gallon storage tanks. Our spray trucks fill off of these two large tanks. When the tanks are empty (about 1 week) I fill them up again. I have the Handler IV model. Before owning this wonderful piece of equipment it would take me 3-4 hours to mix the 5,000 gallons. Now that I have the handler IV it only takes me a little over ONE HOUR to mix all 5,000 gallons! Talk about a time saver! I use my Handler IV in conjunction with my DuraPump Direct Injection System. The combination of these two products has absolutely changed the definition of efficiency for me. If you like to save time and money then this setup is for you. No matter how big or small your lawn care business is, you WILL save time and money using this system. Farmers... You'll never again be out late in the fields spraying because you'll make that time up by using this same system to fill your sprayer.
The H43P65V comes complete with a total drainage tank, Banjo 3” pump, a dual inlet venturi for bulk chemical induction, twin agitation lines, two 16” hinged lids (one with the Handler Knife and one without), container and tank rinsing nozzles, a 4-way forkliftable steel frame, and a pump containment tray. Using closed-loop recirculation through the exclusive dual inlet venturi, this model is able to induct bulk chemicals into the Handler tank without your sprayer needing to be there! Whether it is high volumes of liquid pesticides or large amounts of dry flowable needing to be agitated, a Handler IV can do it all before your sprayer is back to being filled.
Dry AMS (ammonium sulfate) users may be interested in even more agitation. The similar model H43P65 replaces the venturi with a second 2” full port agitation line and provides agitation strong enough to dissolve even AMS that is not spray-grade.
Features and Benefits
- Twin agitation lines
- Comes with the original Handler Knife
- Closed-loop recirculation and agitation
- Full 10L/20L container emptying and rinsing capabilities
- Dual-inlet venturi for driving bulk chemical into the Handler or direct to sprayer fill line
Quick Specifications
- 230 US gallons/870 L
- 3” Camlock connections
- Two 16” hinged & lockable lids
- 2” Dual-inlet venturi
- Rotacraft tank rinsing nozzle
- 3" Banjo/Honda GX200 engine
The Knife
The Handler’s original Knife system cuts plastic chemical containers, empties their contents for mixing, and fully rinses the container for safe disposal. This is all done in less than 30 seconds while filling your sprayer. There is no waste or residual chemical left in the container once rinsed.
The Venturi
The venturi is a specially-designed fitting that draws chemicals from the Handler into the sprayer tank while bypassing the pump. The venturi prevents contamination when changing products, mixes chemicals before they enter the sprayer tank, and provides a continuous flush, saving time and eliminating contamination.
WHY CHOOSE THE HANDLER?
Let's count the reasons.
