Handler III
Please enter your name, address, phone number, and email address along with which model Handler you are interested in. We can then provide you with a detailed quote and set up a time to talk with you.
This one purchase for my lawn care business has saved me more time than any other thing I have ever bought! I (Pete) do all the bulk mixing myself, so, you can imagine this takes up quite a bit of time. I mix 5000 gallons of finished solution each time I mix. This solution goes into two 2,500-gallon storage tanks. Our spray trucks fill off of these two large tanks. When the tanks are empty (about 1 week) I fill them up again. I have the Handler IV model. Before owning this wonderful piece of equipment it would take me 3-4 hours to mix the 5,000 gallons. Now that I have the handler IV it only takes me a little over ONE HOUR to mix all 5,000 gallons! Talk about a time saver! I use my Handler IV in conjunction with my DuraPump Direct Injection System. The combination of these two products has absolutely changed the definition of efficiency for me. If you like to save time and money then this setup is for you. No matter how big or small your lawn care business is, you WILL save time and money using this system. Farmers... You'll never again be out late in the fields spraying because you'll make that time up by using this same system to fill your sprayer.
A larger 70 US gallon tank allows for handling higher volumes of dry flowable powders which can be easily mixed into a solution with the integrated pump and closed loop recirculation. Full functionality includes Handler tank filling and agitation, closed-loop recirculation, dual inlet venturi draw from your choice of Handler tank or bulk containers, 10L & 20L container emptying and rinsing, tank rinsing, a wash line, and of course water transfer to the sprayer tank.
All the functionality with a larger tank, combined with cost-effective 2” plumbing and pump, make the H32P55 a steady favorite on the farm.
Features and Benefits
- Full 10L/20L container emptying and rinsing capabilities
- Dual-inlet venturi and bulk draw capabilities
- Integrated transfer pump
- Comes with the original Handler Knife
- Closed loop recirculation and agitation
- Tank emptying by venturi or direct pump draw
Quick Specifications
- 70 US gallons/275L
- 2” Camlock connections
- 16” Hinged & lockable lid
- 2” Dual-inlet venturi
- 2” Banjo pump/Honda GX200 engine
- Rotacraft tank rinsing nozzle
The Knife
The Handler’s original Knife system cuts plastic chemical containers, empties their contents for mixing, and fully rinses the container for safe disposal. This is all done in less than 30 seconds while filling your sprayer. There is no waste or residual chemical left in the container once rinsed.
The Venturi
The venturi is a specially-designed fitting that draws chemicals from the Handler into the sprayer tank while bypassing the pump. The venturi prevents contamination when changing products, mixes chemicals before they enter the sprayer tank, and provides a continuous flush, saving time and eliminating contamination.
WHY CHOOSE THE HANDLER?
Let's count the reasons.
